CorvAircraft> lcrank case roulting

[Dave Morris "BigD"]

Both tubes are on welded onto the valve cover of the even-numbered 
cylinders.  The big tube comes out the top of the valve cover and 
goes into the top of the separator.  A smaller tube comes out the 
bottom of the separator and flows any excess oil back into a smaller 
tube welded into the side of the same valve cover.  The breather tube 
from the air/oil separator goes toward the center of the firewall and 
curves downward to exit the bottom of the fuselage.  A better photo 
of that tube is here: 
http://www.davemorris.com/Photos/Dragonfly%20Corvair%20Oil%20System/IMG_0642.jpg

Dave


At 06:40 PM 6/30/2006, you wrote:
>Big D.,
>I see the tube from the right head. Then I see some plumbing, what 
>is that and is it routed to the other head.
>I have the same air/oil sep.
>Joe G.
>_________________________________________________________
>search the CorvAircraft archives at 
>http://www.maddyhome.com/corvairsrch/index.jsp
>to UNsubscribe from CorvAircraft, send a message to 
>CorvAircraft-leave at mylist.net
>Other CorvAircraft list info is at http://www.krnet.org/corvaircraft_inst.html