CorvAircraft> coil switcher

[jbfjr]

If you use a Fluke meter to test diodes and it's selector switch 
is set to the diode symbol, I _think_ it will read volts, not 
ohms.  Thus if you connect the leads to forward bias the diode, it 
should read around 8.5V, according to Clare.  Reverse bias 
connection would read "OL" (not 100% sure here, either!).

John Franklin
Richmond, TX

---------- Original Message ----------------------------------
From: "Dave Morris \"BigD\"" <BigD at DaveMorris.com>
Reply-To: Corvair engines for homebuilt aircraft 
<corvaircraft at mylist.net>
Date: Mon, 10 Jul 2006 19:37:38 -0500

>If there's diodes involved, make sure you are measuring with the 
same 
>polarity as someone else is.
>
>Dave Morris
>
>
>At 07:19 PM 7/10/2006, you wrote:
>>Hey Guys,
>>         Just out of curiosity could any of you guys check the 
resistance
>>across the poles on your 8210 MSD coil switchers. I know what 
mine is
>>right now and I know what the tech at MSD says it should be. I 
would like
>>a sample of the actual units from as many as we could get 
together. Humor
>>me here.
>>Thanks
>>Joe Horton, Coopersburg, Pa.
>>joe.kr2s.builder at juno.com
>>
>>_________________________________________________________
>>search the CorvAircraft archives at 
>>http://www.maddyhome.com/corvairsrch/index.jsp
>>to UNsubscribe from CorvAircraft, send a message to 
>>CorvAircraft-leave at mylist.net
>>Other CorvAircraft list info is at 
http://www.krnet.org/corvaircraft_inst.html
>
>
>
>_________________________________________________________
>search the CorvAircraft archives at 
http://www.maddyhome.com/corvairsrch/index.jsp
>to UNsubscribe from CorvAircraft, send a message to CorvAircraft-
leave at mylist.net
>Other CorvAircraft list info is at 
http://www.krnet.org/corvaircraft_inst.html
>
 

________________________________________________________________
Sent via the EV1 webmail system at mail.ev1.net