CorvAircraft> engine out

[jbfjr]

Joe,

Do you have any carbon/soot buildup around the end of the 
exhaust?  (Just grasping at straws,here!)

John F.

---------- Original Message ----------------------------------
From: "Joseph H. Horton" <joe.kr2s.builder at juno.com>
Reply-To: Corvair engines for homebuilt aircraft 
<corvaircraft at mylist.net>
Date: Thu, 13 Jul 2006 08:30:32 -0400

>Guys,
>        The short and sweet of it is that I have gone over and 
checked
>every piece of engine, fuel and ignition.
>Reassembled with all the same parts. It started right up. Flipped 
back
>and forth between the 2 ignitions and no problem found. I ran it 
for
>about 20 min last night.
>        I will replace everything on ignition #2 tonight 
(condenser,
>points, wire, and coil) the other change that I am going to make 
is in
>the ignition switching to a switch that instead of being on #1 or 
#2  is
>a switch that will be #1- both- #2. This would allow both for 
take off
>and landing.
>               Any and all comments???? 
>Joe Horton, Coopersburg, PA.
>joe.kr2s.builder at juno.com
>
>_________________________________________________________
>search the CorvAircraft archives at 
http://www.maddyhome.com/corvairsrch/index.jsp
>to UNsubscribe from CorvAircraft, send a message to CorvAircraft-
leave at mylist.net
>Other CorvAircraft list info is at 
http://www.krnet.org/corvaircraft_inst.html
>
 

________________________________________________________________
Sent via the EV1 webmail system at mail.ev1.net