CorvAircraft> alternative carbs

[david stroud]

> http://www.flickr.com/photos/9773776@N08/sets/
> 
> Try that link Ron and dig around a bit. You'll see that the aluminum
> manifold is just a simple Tee..no need for a "Wye" built into the 
> manifold. Also note the fuel pressure regulator...might have been
> a Holley part, on the right side of the carb. 
> 
> 
> Wow...where's the
> time going eh? Check out that small photo set from Sun n Fun 2002.
> Good pics of Langford doing his thing and a good shot of Dave Poirier
> chatting with Soob guys Gary Krystopik from RI and Tulsa Tom.
> 
> David Stroud   Ottawa, Canada
> C-FDWS  Christavia 
> Fairchild 51 under construction
> 
> 
> ----- Original Message ----- 
> From: "Ron Franck" <franck at geneseo.net>
> To: <dstroud at storm.ca>
> Sent: Wednesday, January 02, 2008 8:47 AM
> Subject: Re: CorvAircraft> alternative carbs
> 
> 
> > At 08:44 AM 1/2/2008, you wrote:
> > >Here is the carb, Gary.
> > >http://www.jpcycles.com/groups.aspx?LID=529d1931-290a-45a4-a551-a515dbe13ecb&DID=295560d0-d7fa-4f4a-bf3f-b64c11107c9a
> > 
> > Dave,
> >     Do you have any pics of your intake runners and carb mount flange?
> > I checked out the link you mentioned. Are the 38 and 40 mm both suitable? 
> > or is one preferred over the other?
> > Ron Franck