CorvAircraft> interpreting GM cam specs
John Brannen
j.brannen at yahoo.com
Tue Jan 8 13:06:43 PST 2008
Michael,
Is your question for the stock 110 Corvair cam?? If
so, I have degreed the stock cam in my 110 and can
send you the specs. Let me know. The basics of the
cam specs I measured are:
Measured specs @ 0.050 lift at lifter
EXH lift at lifter : 0.257" = 0.400" lift at valve
INT lift at lifter : 0.258" = 0.402" lift at valve
(Note: lift at valve assumes a rocker ratio of
1.56)
IVO: 3 ATDC
IVC: 220 ATDC=40 ABDC
INT Duration: 217 degrees
EVO: 220 BTDC=40 BBDC
EVC: 3 BTDC
EXH Duration: 217 degrees
I have plots of the cam profiles for all 720 degrees
of crank rotation with measurements taken every 20
degrees if you want them.
John B.
--- Michael Amick <mkamick at bellsouth.net> wrote:
> Someone sent me the following spec's on a GM cam to
> compare with the
> OT-10. He got this from a Corsa tech guide circa
> 1986.
>
> Does anyone know the algorithm to convert these
> numbers in the form of:
> intake valve open @ xx BTDC / closed@ yy ABDC etc.
>
> "Cam specifications are:
> with ramps intake 70-110 lift .392 exhaust
> 110-70 lift .392
> without ramps intake 58-86 exhaust
> 98-46.
>
> Always something more to learn!
>
> Regards
> Michael Amick
> > No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.516 / Virus Database: 269.17.13/1210 -
> Release Date: 1/5/2008 11:46 AM
>
> >
_________________________________________________________
> search the CorvAircraft archives at
> http://www.maddyhome.com/corvairsrch/index.jsp
> to UNsubscribe from CorvAircraft, send a message to
> CorvAircraft-leave at mylist.net
> Other CorvAircraft list info is at
http://www.krnet.org/corvaircraft_inst.html
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
More information about the CorvAircraft
mailing list