Our pharmacy department is going to make the saccharin solution for us and ordered the ingredients from Spectrum chemicals. 

This is the recipe (copied from OSHA Respiratory Protection Standard 29 CFR 1910.134 Appendix A)

Saccharin

(5) The fit test solution is prepared by adding 83 grams of sodium saccharin to 100 ml of warm water.

Bitrex^TM (Denatonium benzoate)

(5) The fit test solution is prepared by adding 337.5 mg of Bitrex to 200 ml of a 5% salt (NaCl) solution in warm water.

The link is to Spectrum chemicals is below. Yesterday, I called the CS line, 1.800.772.8786, and was informed that there is a 2-3 week time lag for the Moldex Bitrex Sensitivity Solution and the Moldex Fit Test solution. 

https://www.spectrumchemical.com/search/go?view=list&w=bitrex

JoAnn Shea, APRN, MS, COHN-S

Director, Team Member Health and Wellness

Tampa General Hospital

Office: 813-844-7692

Cell:      813-789-3441

jshea@tgh.org

From: MCOH-EH <mcoh-eh-bounces@mylist.net> On Behalf Of PRATER, DEANNA
Sent: Friday, May 1, 2020 3:05 PM
To: MCOH-EH <mcoh-eh@mylist.net>; mcoh-eh-bounces@mylist.net
Subject: [MCOH-EH] fit testing solution

WARNING: This email came from an external source outside of Tampa General Hospital.

Wit fit testing solution hard to come by these days, are any of you using Stannic Chloride or Isoamyl Acetate to fit test???

Or does anyone have an abundance of testing solution they would sell??  We have community partners who need tested and we are low on solution.

 
This message contains information that may be confidential.  This message and the information contained herein is intended solely for the use of the intended addressee(s).  If you are not an addressee or not an intended addressee, your disclosure, copying, distribution or use of the contents of this message is prohibited.  If this message has been sent to you in error, please notify the sender by return email or by telephone.  Thank you.

DO NOT CLICK on links or attachments from unsolicited senders that you don’t recognize or trust.
NEVER provide your account ID and password.